Note/IllustrationAction
Remove the screws and lift out the robot
signal exchange proxy.
3
Removing the Ethernet extension switch (option)
Note/IllustrationAction
xx1800000491
Carefully pull the side of the Ethernet
extension switch and rotate it tightly to
take it out from the bracket.
1
Removing the connected services gateway
Note/IllustrationAction
xx1800000495
TOP VIEW
Carefully pull the side of the connected
services gateway and rotate it tightly to
take it out from the bracket.
1
Continues on next page
230 Product manual - OmniCore V250XT
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.2.8 Replacing the main computer
Continued
To Next Page
Loading...
