ABB OmniCore V250XT - Page 240

Removing the main computer
Note/IllustrationAction
xx1900001892
Remove the screws holding the main
computer.
1
xx1900001893
Remove the main computer.
ELECTROSTATIC DISCHARGE
(ESD)
When handling the computer outside of
the controller, use the wrist strap button
located on the side of the computer.
2
xx1900001894
Continues on next page
240 Product manual - OmniCore V250XT
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.2.8 Replacing the main computer
Continued