Refitting the fieldbus master
Note/IllustrationAction
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
When handling the computer outside of
the controller, use the wrist strap button
located on the side of the computer.
1
xx2000000419
xx1900001911
Insert the fieldbus master straight into
the card slots along the guide rail.
2
Screws: Screw with flange M3x6 (1 pcs)Secure the fieldbus adapter with the
screw.
3
xx1900001910
Continues on next page
274 Product manual - OmniCore V250XT
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.2.12 Replacing the fieldbus master
Continued
To Next Page
Loading...
