ABB OmniCore V250XT - Page 402

LEDs
The illustration below shows the LEDs on the process power supply module:
A
en1000000037
DC OKA
SignificanceDescription
GREEN: When all DC outputs are within the specified output voltage
levels.
DC OK
OFF: When DC output voltage is outside the specified voltage levels or
turned off due to short circuit or overload.
402 Product manual - OmniCore V250XT
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
7 Troubleshooting
7.3.9 Troubleshooting the process power supply
Continued