ABB SACE Emax 2 Series - Protections and Measurements

ABB | SACE Emax 2
Ekip Touch protection release | 18 - Self-diagnosis
145 | © 2013 ABB | 1SDH001000R0002 - L7804
Protections and Measurements
In the event of protection or measurement alarms, the associated signals are reported:
Signal Alarm type
L pre-alarm L Protection
G prealarm Protection G
Gext prealarm Gext protection
S Alarm (blocked trip) Protection S
S2 Alarm (blocked trip) Protection S2
T prealarm Protection T
UV alarm (Blocked Trip) Protection UV
OV alarm (Blocked Trip) Protection OV
G alarm (Blocked Trip) Protection G
Gext alarm (Blocked Trip) Gext protection
T alarm Protection T
T alarm (Blocked Trip) Protection T
RV alarm (Blocked Trip) Protection RV
RP alarm (Blocked Trip) Protection RP
UF alarm (Blocked Trip) Protection UF
OF alarm (Blocked Trip) Protection OF
UnderActivePowerBlockedTrip Protection UP
MaxReactivePowerBlockedTrip Protection OQ
UV2 alarm (Blocked Trip) Protection UV2
OV2 alarm (Blocked Trip) Protection OV2
UF2 alarm (Blocked Trip) Protection UF2
OF2 alarm (Blocked Trip) Protection OF2
ROCOFalarmBlockedTrip Protection ROCOF
LC Alarm Current thresholds protections
Iw warning Current thresholds protections
Contact Wear PreAlarm Contact wear measurement
Contact Wear Alarm Contact wear measurement
Harmonic Distorsion > 2.1 Harmonic distortion measurement
Power Factor Error Power factor measurement
Phase Cycle Error Cyclical sequence measurement
Frequency Error Frequency measurement
Single Current Harmonic over threshold Harmonics measurement
Single Voltage Harmonic over threshold Harmonics measurement
Current THD over threshold Harmonics measurement
Voltage THD over threshold Harmonics measurement