ABB | SACE Emax 2
Ekip Dip protection release | 5 - List of alarms and signals
49 | © 2013 ABB | 1SDH001000R0002 - L7804
5 - List of alarms and signals
LED view
The Ekip Dip release continuously monitors its own operating status and that of all the devices
to which it is connected. All the signals are available with the front LEDs.
The protection LEDs provide information with various combinations of lighting and flashing,
while the Power LED, as described on page 36, indicates the power status of the release.
Figure 64
NOTE: with release in LI and LSI version, the expression “all the LEDs” must be
adapted to the maximum number of LEDs available
To Next Page
Loading...
