ABB SACE Emax 2 Series - Measuring Instruments Page; Description; Components of the; Possible Operations

ABB | SACE Emax 2
Ekip Touch protection release | 4 - Measuring instruments page
63 | © 2013 ABB | 1SDH001000R0002 - L7804
4 - Measuring instruments page
Description
The Measuring instruments pages show an indicator of the maximum phase current, or the
maximum phase-to-phase voltage, or the reactive or apparent active power.
Components of the pages
The pages appear as follows:
L3
A
B
D
. . . .
A
528.9 A
C
. . . .
E
Figure 70
The following table provides a description of the various areas of the pages:
Pos. Description
A
Type of indicator:
• A: ammeter, with measurement of the maximum phase current.
• V: ammeter, with measurement of the maximum phase-to-phase voltage.
• kW: measurement of the active power.
• kVAR: measurement of the reactive power.
• kVA: measurement of the apparent power.
NOTE: all the indicators except the ammeter are available with the Ekip
Measuring module.
B Measurement expressed as percentage of the nominal value set.
C Measurement as an absolute value (A, V, kW, kVA).
D Phase current or phase-to-phase voltage, to which the measurement refers.
E Diagnosis bar.
Possible operations
In these pages, you can do the following:
• By touching the sides of the display, scroll through the available indicators.
• Open the page Alarm List.