ABB SACE Emax 2 Series - Insertion of the Password; Description; Components of the Page

ABB | SACE Emax 2
78 | © 2013 ABB | 1SDH001000R0002 - L7804
Ekip Touch protection release | 7 - Insertion of the password
7 - Insertion of the password
Description
The page for the insertion of the password is open if a parameter to be set is selected, or the
menu Test, or if you want to change the password.
NOTE: insertion of the password is requested, if:
• The password has never been inserted.
• After programming has been cancelled.
• After a few minutes of inactivity have passed.
The password is composed of five digits, each of which can have a value from 0 to 9.
The default value is “00001”, and it must be modified after the first switch-on in order to
prevent access to parameters and tests by unauthorized personnel.
In order to modify the password, from the menu Settings, you need to select System, New
Password.
Components of the page
The page appears as follows:
C
D
****0
A B
E
Password
Confirm
Figure 78
The following table provides a description of the various areas of the page:
Pos. Function
A Cancels the operation, and opens the start menu.
B Shows the name of the page.
C Keys to increment and decrement the corresponding digit.
D It displays the digits of the password.
E
Confirm key:
• Confirmation after inserting a digit in a position from 1 to 4 will automatically
bring you to the next digit.
• When the fifth digit is confirmed, the entire password is confirmed and the
selected page is opened.
NOTE:
The Confirm key must be pressed every time you want to confirm a digit.
Continued on the next page