ABB SACE Emax 2 Series - Ekip Touch Protection Release; Layout of the Interface; Functions of the Interface

ABB | SACE Emax 2
Ekip Touch protection release | 1 - Layout of the interface
55 | © 2013 ABB | 1SDH001000R0002 - L7804
Ekip Touch protection release
1 - Layout of the interface
Functions of the interface
The operator interface for Ekip Touch releases allows you to:
• View signals and measurements related to the functions in progress, or recorded events.
• Configure the circuit-breaker, and the installation parameters.
• Set the parameters for available protections and for other functions of the release.
• Set parameters for the connected accessory modules.
• Perform tests.
• Display information on the circuit-breaker, release, and connected accessory modules.