ABB SACE Emax 2 Series - Ekip Com Actuator Module; Description; Connections; Compatibility

ABB | SACE Emax 2
Electronic accessories | 12 - Ekip Com Actuator module
219 | © 2013 ABB | 1SDH001000R0002 - L7804
12 - Ekip Com Actuator module
Description
Ekip Com Actuator is an accessory module that allows the Emax 2 circuit-breakers to be
opened and closed remotely.
Connections
C2
C3
YC
C12
C13
YO
C1 C11
Ekip Com Actuator is installed on the front of the circuit-breaker in the accessories area.
Information on the assembly is available from the web site http://www.abb.com/abblibrary/
DownloadCenter/, in particular with the kit sheet 1SDH001000R0501.
Wiring diagrama are provided below for the module:
S43
C13
C13
C13
+
~
SO
~
-
C12
C12
C12
YO
C11
C11
C11
76
XB4 1
XB4 2
K51
YO
K51
7XK7
XK7
8
Ekip Com Actuator
A4
X
XV
X
XV
A1
A4
78
C1
C1
C1
YC
C2
C2
C2
-
~
SC
~
+
C3
C3
C3
S43
XB3 1
XB3
2
K51
YC
K51
9XK7
XK7
10
Ekip Com Actuator
Diagrams 78 - 76
Further information is available on page 156, or on the site http://www.abb.com/abblibrary/
DownloadCenter/, where the wiring diagram is available 1SDM000091R0001.
Compatibility
Ekip Com Actuator module is supplied on request and is compatible with all Ekip releases if
there is an Ekip Com or Ekip Link module present.