ABB SACE Emax 2 Series - Advanced Menus

ABB | SACE Emax 2
68 | © 2013 ABB | 1SDH001000R0002 - L7804
Ekip Touch protection release | 6 - Menu
Advanced menus
The following table illustrates the submenus and the protections associated to the menu
Advanced, and the Ekip Touch releases in which they can be found.
IMPORTANT:
• Selecting a protection opens the list of parameters that can be set for the selected
protection.
• With Hi-Touch and G Hi-Touch releases, and the Dual Set function enabled (see
the Settings menu), the protections can be set according to two configurations
(Set A and Set B), of which the default configuration can be selected.
Advanced
Release
• Set A
(1)
• Set B
(1)
Protection S(V) - - G-Touch
G
Hi-Touch
Protection S2(V) - - -
protection MCR Touch
Hi-Touch
G-Touch
Protection D - -
Protection IU
Touch
G-TouchProtection RC
(2)
Protection UV Touch
(3)
Protection UV2 - -
Protection OV Touch
(3)
G-Touch
Protection OV2 - -
Protection RV - -
G-TouchProtection VU Touch
(3)
Hi-Touch
Protection UF Touch
(3)
Protection UF2 - -
Protection OF Touch
(3)
G-Touch
Protection OF2 - -
Protection ROCOF - - -
Protection RP Touch
(3)
Hi-Touch
G-Touch
Protection RQ - -
Protection OP - -
Protection OQ - -
Protection UP - -
Synchrocheck Protection
(4)
Touch
(3)
Hi-Touch
Signaling Touch
(3)
Current thresholds
Touch
Function
(1)
Submenus available with Hi-Touch and G Hi-Touch releases, and the Dual Set function enabled (see the
Settings menu).
(2)
Protection available with Rating Plug RC and Ekip Measuring Pro modules, and external differential toroid
or RC (see the menu Settings, Circuit-breaker, Earth protection), and alternative to the Gext protection (see
the Protections menu).
(3)
Protection available with Ekip Measuring Pro module.
(4)
Protection available with the Ekip Synchrocheck module.