ABB | SACE Emax 2
Accessories | 1 - Preliminary considerations
153 | © 2013 ABB | 1SDH001000R0002 - L7804
Accessories
1 - Preliminary considerations
Introduction
The Emax E2.2 E4.2 E6.2 circuit breakers have a series of electric and mechanical accessories
applicable according to the circuit-breaker type, and a series of electronic accessories
applicable according to the type of Ekip release with which the circuit-breaker is equipped.
Accessory combination tables
The following table shows the possible combinations of the electrical and mechanical
accessories:
Type of Accessory Accessory
Circuit-
breakers
Disconnectors
Derived versions
CS MV MTP
Electrical signalling
AUX 4Q S R - - -
AUX 6Q R R - - -
AUX 15Q R R - - -
AUP (*) R R R R R
RTC R R - - -
S51 S - - - -
S33 M/2 R R - - -
Electrical control
YO-YC R R - - -
YO2-YC2 R R - - -
YU R R - - -
M R R - - -
YR R - - - -
Safety mechanical
KLC and PLC R R - - -
KLP and PLP (*) R R - - R
SL (*) S S - - S
SLE (*) R R - - -
DLR (*) R R - - R
DLP (*) R R - - R
DLC R R - - R
Anti-racking-in lock S S - - S
MOC R R - - R
Protection mechanical
PBC R R - - R
IP54 R R - - R
Interlocks MI R R - - R
S: Standard. R: On request. (*): only for withdrawable version.
Continued on the next page