ABB SACE Emax 2 Series - Components of the Menus

ABB | SACE Emax 2
66 | © 2013 ABB | 1SDH001000R0002 - L7804
Ekip Touch protection release | 6 - Menu
Components of the menus
The menus appear as follows:
A B
C
D
D
Advanced
S(V) Protection
Current-Voltage Protection (51V)
S2(V) Protection
Current-Voltage Protection (51V)
MCR Protection
Short circuit
D Protection
Directional (67)
IU Protection
Current unbalance (46)
Figure 73
The following table provides a description of the various areas of the menus:
Pos. Function
A It opens the higher level menu, or if there isn't one, the Menu page.
B It displays the name of the menu.
C
• It displays a list of the available submenus, the parameters that can be set,
and the commands that can be performed
• Depending on which it is selected, it opens a submenu, the Edit Parameters
page, or an information page, or performs a command.
D Scroll the list
NOTE: in the menus, under each parameter, the current value is shown.