ABB SACE Emax 2 Series - Page 180

ABB | SACE Emax 2
176 | © 2013 ABB | 1SDH001000R0002 - L7804
Electronic accessories | 3 - Ekip Synchrocheck module
Continued from the previous page
The following table illustrates the path from the display for viewing the measurements related
to the synchronism function:
Measurements
…
Harmonic distortion
Ekip Synchrocheck
Network Analyzer
…
The following table illustrates the measurements related to the synchronism function:
Configuration Measurement Description
With Bar live
Ext Side Voltage Voltage measured by Ekip Synchrocheck.
Int Side Voltage Voltage measured by Ekip Measuring
(1)
.
Ext Side Frequency Frequency measured by Ekip Synchrocheck.
Int Side Frequency Frequency measured by Ekip Measuring
(1)
.
Phase Difference Phase difference between the voltages.
With Bar
dead
Ext Side Voltage Voltage measured by Ekip Synchrocheck.
Int Side Voltage Voltage measured by Ekip Measuring
(1)
.
(1)
For the characteristics of the voltage and frequency (internal) measurements of the Ekip Measuring, refer
to those of the Ekip Measuring module (see page 165).
The following table illustrates the path for accessing the configuration parameters of the
module from the display:
Settings
…
Network frequency
Modules
Local/Remote
Local Bus
…
Ekip Synchrocheck
Primary Voltage
Secondary Voltage
Concatenated Ref
NO Contact
…
Function
Power Controller
…
Continued on the next page