ABB tacteo KNX User Manual

ABB i-bus
®
KNX
Commissioning
104 2CDC508134D0202 | FCA/S 1.x.x.1
3.2.3.3 Parameter window AB: Output (valve drive, motor-driven (3-point))
All settings for output A/B as valve drive, motor-driven (3-point) are made in this parameter window.
Note
This parameter window is visible for the products FCA/S 1.1.1.2 and FCA/S 1.1.2.2.
These parameters appear if the option Valve drive, motor-driven (3-point) has been selected for the
outputs.
Reversing time
Options:
100, 300, 500, 700, 1,000 ms
This parameter defines the reversing delay time of the valve drive.
Note
The technical data of the valve drive must be observed!

ABB tacteo KNX Specifications

General

Brand	ABB
Model	tacteo KNX
Category	Controller
Language	English