20
6 Connection, installation / mounting
Danger - Electric voltage!
Install the device only if you have the necessary electrical engineering
knowledge and experience.
■
Incorrect installation endangers your life and that of the users of the
electrical system.
■
Incorrect installation can cause serious damage to property, e.g. due to fire.
The minimum necessary expert knowledge and requirements for the installation
are as follows:
■
Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect
2. Secure against being re-connected
3. Ensure there is no voltage
4. Connect to earth and short-circuit
5. Cover or barricade adjacent live parts.
■
Use suitable personal protective clothing.
■
Use only suitable tools and measuring devices.
■
Check the type of supply network (TN system, IT system, TT system) to
secure the following power supply conditions (classic connection to ground,
protective earthing, necessary additional measures, etc.).
■
Observe the correct polarity.
Caution - Glass breakage!
The breakage of a glass plate could lead to the risk of injury.
Thr glass plate consists of high-quality safety glass. Yet breakage cannot be
excluded.
– Avoid force being applied to the glass plate.
– Never reach into a broken glass with you bare hands.
To Next Page
Loading...
