ABB tacteo KNX - Value for Cyclic Sending

Description of application and parameters
Application "General functions"
Product manual 2CKA001473B9482
│
145
11.6.2.8 Value for cyclic sending
The possible options and setting limits depend on parameter "Object type".
Options for selection "1 bit switching" and "1-bit alarm":
Options: Off
One
Options for selection "1 byte 0-100%":
Options: Setting option from 0 to 100 (%)
Options for selection "1 byte 0-255":
Options: Setting option from 0 to 255
Options for selection "2-byte float":
Options: Setting option from -671088.64 to 670760.96
Options for selection "2-byte signed":
Options: Setting option from -32768 to +32767
Options for selection "2-byte unsigned":
Options: Setting option from 0 to 65535
Options for selection "2-byte temperature":
Options: Setting option from -273 to 500
Options for selection "4-byte float":
Options: Setting option from -4000000 to 4000000
Options for selection "4-byte signed":
Options: Setting option from -2147483648 to 2147483647
Options for selection "4-byte unsigned":
Options: Setting option from 0 to 4294967295
The parameter is used to fix the value that must be received on object "GFx: input" to ensure
that the same value is sent cyclic via object "GFx: output". The bit size depends on parameter
"Object type".