EasyManua.ls Logo

ABB tacteo KNX - Overwrite Delay Time During Download

ABB tacteo KNX
182 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Description of application and parameters
Application "General functions"
Product manual 2CKA001473B9482
168
11.6.7.8 Overwrite delay time during download
Options: Deactivated
Activated
Deactivated:
The delay time will not be overwritten when the device is reprogrammed.
Activated:
The delay time will be overwritten when the device is reprogrammed.
A telegram with a new delay time (s) can be received via the 2-byte communication object "GFx:
delay time". The received 2-byte value is written to the memory of the device and is retained
even after a power failure.
The parameter is used to specify whether the received storage value is to be retained for a
reprogramming of the device or replaced by the values specified in the parameterising software.

Table of Contents

Related product manuals