ABB tacteo KNX - Control Settings - Button Configuration; Button Top Left

Description of application and parameters
Application "Function block RTC"
Product manual 2CKA001473B9482
│
75
11.5.4 Control settings — Button configuration
11.5.4.1 Button top left
Options: Eco
ON/OFF
Menu
Fan
■
Eco:
– If selected, the ECO mode can be activated or deactivated with a press of the button.
■
ON/OFF:
– If selected, the temperature regulation can be switched on or off with a press of the
button. Frost/heat protection remain active in a switched off state.
■
Menu:
– If selected, the following operating modes are available via the button:
■
Off mode
■
Heating/cooling switchover (if parameterised)
■
Fan operation (if parameterised).
– Selection of stored operating modes is carried out with repeated presses of the button.
The adjustment. e.g. changing the fan speed level, is carried out with the "+" and "-"
buttons.
■
Fan:
– If selected, the fan speed level can be changed with repeated presses of the button.
The parameter is used to specify the function with which the top left button is occupied.