37
9.4.3 Adjusting the fan speed levels
1
2
4
3
1. Press the button [1] continuously until
the display flashes
2. Press the "Menu" button [1].
– Keep pressing it until the fan
speed level icon is shown on the
display.
3. Press the PLUS/MINUS button [2]/[3]
to adjust the fan speed level.
– The set fan speed level is
adopted when a timeout happens
after nothing has been pressed
for a certain period of time, or if
the "Menu" button [1] is pressed
again.
– The manually set fan speed level
is shown in the setpoint (comfort
mode) on the display in the
centre at the top.
Fig. 26: Display of fan operation
Note
The function of the fan speed levels is adjusted in application "RTC". This
function is inactive if "Fan coil" has not been parameterized.
To Next Page
Loading...
