ABB tacteo KNX - Assigning the Group Address(Es); Selecting the Application Program; Differentiating the Application Program

Commissioning
Product manual 2CKA001473B9482
│
28
7.1.3 Assigning the group address(es)
The group addresses are assigned in connection with the ETS.
7.1.4 Selecting the application program
Please contact our Internet support unit (www.BUSCH-JAEGER.com). The application is loaded
into the device via the ETS.
7.1.5 Differentiating the application program
Various functions can be implemented via the ETS.
Detailed description of parameters, see chapter 11 “Description of application and parameters“
on page 41 (only in languages DE, EN, ES, FR, IT and NL).