ABB tacteo KNX - Brightness of the Colours; Colour for off

Description of application and parameters
Application "Function block RTC"
Product manual 2CKA001473B9482
│
128
11.5.138.3 Brightness of the colours
Options: Dark
Bright
■
Dark:
– The button LEDs light up with minimal brightness.
■
Bright:
– The button LEDs light up with high brightness.
The parameter is used to specify whether the RTC button LEDs light up continuously dark or
bright. No distinction is made between day or night.
Note
The parameter is only adjustable if the "Day/night mode" parameter is set on
"deactivated".
11.5.138.4 Colour for Off
Options: Off
Yellow
Red-orange
Red
Violet
Blue
Green
White
■
Off:
– The button LEDs are switched off.
■
Yellow - white:
– The button LEDs light up in the fixed colour at switching signal "Off".
The parameter is used to specify the colour the RTC button LEDs light up in when the device
receives an Off telegram via the 1-bit communication object "Status LED". The default setting is
"green".
Note
The parameter can only be set if the "Operating mode" parameter and is set on
"Status illumination" and the "Object type for status object" parameter is set on
"1 bit".