35
9.4.1 Switching On and Off
Switch-on
1. Press the button [1].
– The functions which were active
before deactivation are activated.
– The set-point temperature is
shown on the display.
Switch-off
1. Press the button [1] continuously until
the display flashes.
2. Press the button [1] again several
times until function "ON/OFF" is
displayed.
3. Press the button [1] continuously until
the device switches into the "Off"
status.
Fig. 24: RTC control elements
Note
In the OFF mode all functions and all buttons of the device (except button [1])
are deactivated.
1
2
4
3
To Next Page
Loading...
