ABB tacteo KNX - Brightness of the LED During Blockage; LED Colour in a Blocked State

Description of application and parameters
Application "Device settings"
Product manual 2CKA001473B9482
│
63
11.3.3.7 Brightness of the LED during blockage
Options: Off
Dark
Bright
■
Off:
– The LED does not light up at blockage.
■
Dark:
– The LED lights up dark at blockage.
■
Bright:
– The LED lights up bright at blockage.
The parameter is used to specify whether or in which brightness the LED lights up when the
device is blocked.
11.3.3.8 LED colour in a blocked state
Options: Yellow
Orange
Red
Violet
Blue
Green
White
■
Yellow - white:
– The LED lights up in the specified colour during blockage.
The parameter is used to specify the colour the LED lights up in when the device is blocked.
Note
The parameter is only adjustable if the "Brightness of LED during blockage"
parameter is set on "dark" or "bright".