Description of application and parameters
Application "Function block RTC"
Product manual 2CKA001473B9482
80
11.5.11 General - Additional functions/objects
Options: No
Yes
– This parameter enables additional functions and communication objects.
11.5.12 General — Delay time for read telegrams after reset [s]
Options: Setting option from 1 - 255 seconds
– This parameter can be used to receive telegrams via the "Input" object. The received
telegrams are sent with the set delay time to the "Output" object after a reset.
Note
This parameter is only available if the "Additional function" parameter is set to
"Yes".
To Next Page
Loading...
