ABB tacteo KNX - Page 69

Description of application and parameters
Application "Primary function"
Product manual 2CKA001473B9482
│
69
11.4.1.5 Value 1/Value 2
The possible options depend on parameter "Object type".
Options for selection "1 bit":
Options: Off
One
Options for selection "1 byte 0-100%":
Options: Setting option from 0 to 100 (%)
Options for selection "1 byte 0-255":
Options: Setting option from 0 to 255
Options for selection "Light scene number (1-64)":
Options: Setting option from 1 to 64
Options for selection "RTC operating mode switchover (1 byte)":
Options: Auto
Comfort
Standby
ECO
Frost/heat protection
The parameter is used to set value 1 that is sent at a press of the button.
Note
Parameter can only be set if the "Reaction at rising/falling edge" parameter is set
on "Value 1" or "Alternating Value1/Value2".