106
Input Ring Modulator
To enter this page, press EDIT (in the lower EFFECTS section)
until the LED flashes, and navigate with the PARAMETERS but-
tons.
The source specified by the Input Select parameter (see “Input
Select” on page 134) can be ring-modulated with the oscillator
signal:
Mix
> Off, 1 to 63, Ringmod, 65 to 126, Input: “Off” means no
input ring modulation, other values determine the balance
between the two signals: “1” is mostly the untreated oscilla-
tor signal, “Ringmod” is the ring-modulated signal only, and
“Input” is the input signal only.
To Next Page
Loading...
