159 CONFIGURATION REFERENCE
Audio Clock
Source
Specifies the source of audio clock used for synchronization.
>Auto: The default setting. Audio clock via USB or S/PDIF is
automatically recognized, otherwise the internal one is used.
> Internal: Only use the internally generated audio clock.
Frequency
> 44.1 kHz, 48.0 kHz: Basic audio clocking frequency.
> Synced to Host: Virus is clocked by host.
Soft Knob (global settings)
Three identical menu pages, one for each Soft Knob...
Destination
> Off, Analog Boost Int ... Velo>Volume: Global destination.
Used whenever the Soft Knob is left undefined in a program
(see “Soft Knob” on page 135) or the Global parameter is set
to On here...
Mode
>Single: The individual program setting for this Soft Knob will
apply. See “Soft Knob” on page 135.
> Global: Only the global destination (see below) will apply.
Overrides all individual program settings for this Soft Knob.
To Next Page
Loading...
