167 MULTI MODE REFERENCE
Program
Can be stepped when this menu is closed via SHIFT + VALUE.
> 0 to 127: Selects the Single program to be automatically cop-
ied into the current Part.
Volume
> -64 to +63: Bipolar parameter for balancing levels between
different Parts.
Panorama
> -64 to +63: Stereo position of the Part. Overrides/overwrites
the Single parameter of the same name (see “Panorama” on
page 129).
MIDI Channel
> 01 to 16: The MIDI channel to which this Part will respond.
Output
Specifies Part output:
> Out1 L ... Out3 R: Sends this Part to the selected analogue
output jacks.
Transpose
> -48 to +48 semitones: Part transposition. Adds/subtracts
from the Single parameter of the same name (see “Trans-
pose” on page 129).
Detune
> -64 to +63: Tunes all pitched elements (oscillators, filters)
within a fairly narrow range.
To Next Page
Loading...
