40
The Arp Section
Arpeggiators are so much fun that I will leave
you to experiment on your own – the following
is just to help you get started:
Go to program ROM-A 7 BellBoy BC, take
amplifier RELEASE down to 42 and press the
ARP ON button. Hold down a note, tap several
more notes at random with your other hand, then release the
first one. All notes are played back in a regular rhythm, from
the lowest upwards. Of course you can change this behaviour:
Press EDIT in the ARP section, locate the first page, change
the Mode to “As Played”, change Octaves to 2 and Pattern to
4.
If all those preset patterns are not enough, you can program
your own using the VirusControl software (see “VirusControl”
on page 145).
(/,$
!20
!20/.
%$)4
To Next Page
Loading...
