137 SOUND PARAMETERS REFERENCE
MIX
This section controls the relative levels of all sound sources
except audio inputs. The MIX section has no EDIT button – you
will find all MIX parameters in the oscillators edit menu.
OSC BALANCE
Cross fade between oscillator 1 and oscillator 2.
See “Balance” on page 112.
PANORAMA
Via SHIFT + OSC BALANCE. Position of the signal output
across the stereo field.
SUB OSC VOLUME
Sub oscillator volume. See “About HyperSaw and
Sub Oscillators” on page 107.
OSC3 VOLUME
Via SHIFT + SUB OSC VOLUME. The volume of oscillator 3
when it is switched on (via the OSC3 ON button).
Original Value Indicator
This LED lights up briefly when the original value of any parame-
ter (as stored in memory) has been reached.
OSC VOLUME
Controls the overall level of the 3 oscillators plus the sub-oscil-
lator, but not the noise and ring modulator levels. Note that pos-
itive values do not increase the volume, but only the saturation
intensity.
See “Osc Volume” on page 122 and “Saturation” on page 140.
SATURATION TYPE
Via SHIFT + OSC VOLUME. Filter saturation type.
See “Saturation” on page 140.
NOISE VOLUME
The level of the noise signal, independant of OSC VOLUME.
See “Noise” on page 124.
RING MODULATOR
Via SHIFT + NOISE VOLUME. The level of the ring modulator
signal, independant of OSC VOLUME.
To Next Page
Loading...
