155 CONFIGURATION REFERENCE
Transmit MIDI Dump
Transmits various types of system exclusive data to an external
device e.g. a computer or another Virus.
>Single Buffer: The contents of the single Edit buffer i.e. the
current Single program (or Part without the Multi settings).
This function is also available in the STORE menu for easy
access – see the “Patch No” option under “STORE” on
page 136.
>Single Bank A: All 128 programs in Bank A.
> Single Bank B: All 128 programs in Bank B.
>Single Bank C: All 128 programs in Bank C.
>Single Bank D: All 128 programs in Bank D.
> Controller Dump: A Single program, but in the form of a suc-
cession of individual parameter changes. These can take the
form of MIDI CCs, Polypressure or Sysex, depending on the
value of two other parameters (see “MIDI Control” on
page 157). The Controller Dump setting is mainly used for
updating the data in parameter-based editors (e.g. a Logic
environment) and can be relatively slow.
>Arrangement: All 16 sounds in the current Multi buffer or
Sequencer mode buffer plus the additional “multi” settings.
> Multi Bank: All Multi programs.
> Remote Patches: All Remote Templates.
Keyboard
Note: The “Keyboard” pages are only available in keyboard ver-
sions of the Virus.
Local
>Off: Keyboard data (notes, modulation wheel, pitch bend etc.)
is sent only to MIDI OUT, not to the internal sound generation.
>On: Standard setting. The keyboard is directly connected to
the internal sound generation as well as to MIDI out.
Mode
This parameter can be set in Single mode, but it only applies to
MULTI mode. See “Multi Mode Reference” on page 165.
To Next Page
Loading...
