156
> One Channel: The keyboard transmits MIDI data (notes etc.)
to the currently selected Part via the MIDI channel defined in
that Part.
> Multi Channels: The keyboard transmits MIDI data (notes
etc.) to all Parts, regardless of the assigned MIDI channel.
Transpose
> -64 to +63: Transposes (in semitones) either the sound
engine (see glossary) or the keyboard, depending upon the
value of Transpose Buttons...
Transpose Buttons
> Patch, Keyboard: Specifies whether the TRANSPOSE but-
tons on the panel will apply to the sound engine (Patch) or to
MIDI note data from the keyboard.
Mod Wheel
> 0 to 127: Specifies the MIDI CC number (see glossary) trans-
mitted by the modulation wheel. The standard value is 1
(“Mod Wheel”).
Hold Pedal
> 0 to 127: Specifies the MIDI CC number transmitted by a
device – usually a Hold (sustain) pedal connected to the
HOLD socket. The standard value is 64 (“Hold”).
To Next Page
Loading...
