98
Feedback
> -64 to +63: The amount of signal fed back into the Chorus
input. The Feedback parameter is bipolar because positive
and negative values have different tonal characteristics.
Modulation destination “Chorus Feedback“.
Mod Rate
> 0 to 127: Modulation rate – the speed of the dedicated LFO.
Modulation destination “Chorus Mod Rate”.
Mod Depth
> 0 to 127: How much the LFO modulates the Delay parame-
ter. Modulation destination “Chorus Mod Depth“.
Mod Shape
> Sine, Triangle, Sawtooth, Square, S&H, S&G: Selects the
waveform used to modulate the Delay parameter.
Phaser
Typically, phasing is the classic “whoosh” effect originally
achieved by running two tape machines in parallel, then
slightly changing the speed of one of them. The Virus phaser
uses up to six “all-pass” filters to achieve a very similar effect.
In combination with Feedback, the Virus phaser is also capa-
ble of resonator, ensemble, vibrato and flanging effects. Note
that if the Mix parameter is set to Off, the other parameters will
not be visible in the menu.
Mix
Accessible from the panel via the TYPE/MIX knob.
To Next Page
Loading...
