158
> Poly Pressure: Page B parameters are transmitted and
received in the form of Poly-pressure (see glossary) data.
Inputs
Boost
> 0 to 127: Boosts the input - use this only for very low level
signals.
Input Thru
> 0 to 127: The level of external signal sent directly to
output 1.
Source
>Analog: Audio input is via the INPUT jacks only.
>S/PDIF: Audio input is via S/PDIF only.
Sensitivity
> + 1 6 d B V, + 5 d B V, - 8 d B V, - 1 6 d B V: Select sensitivity to suit
different external audio sources.
Characteristic
> Linear, Phono: Vinyl discs have a special frequency
response which generally needs adjusting for. Set this
parameter to Phono when either connecting a turntable
directly or using audio material recorded directly from vinyl
(i.e. without deemphasis).
To Next Page
Loading...
