Access Virus TI - Page 119

119 SOUND PARAMETERS REFERENCE
Mode
Accessible from the panel via SHIFT + oscillator SHAPE.
> Classic, HyperSaw, WaveTable: Selects the basic type of
oscillator.
Index
> 1 to 127: Selects the nominal position within the WaveTable.
Modulation destination “Wavetable 2 Index“ or
“Osc2 Shape” (these are equivalent).
Table
> Sine ... Violator: Selects one of many wavetables.
Semitone
As in oscillator 1 – see “Semitone” on page 111. Modulation
destination “Osc2 Pitch“.
Key Follow
As in oscillator 1 – see “Key Follow” on page 112.
Balance
Mirrors the Balance parameter in the oscillator 1 page – see
“Balance” on page 112.
Detune
Accessible from the panel via the DETUNE 2/3 knob when oscil-
lator 1 or 2 is selected.
> 0 to 127: Fine-tunes oscillator 2 upwards. Modulation desti-
nation “Osc2 Detune“.