169 MULTI MODE REFERENCE
Keyboard to MIDI
Only available in keyboard versions (TI keyboard, Pølar). See
“Keyboard” on page 155.
> Disabled, Enabled: Specifies whether notes played on the
keyboard will also be sent to MIDI OUT.
Hold Pedal
> Disabled, Enabled: Specifies whether the Part will respond
to MIDI CC#64 (usually a Sustain Pedal).
Volume RX
> Disabled, Enabled: Specifies whether the Part will respond
to MIDI CC#7 (Volume).
Prog Change
> Disabled, Enabled: Specifies whether the Part will respond
to MIDI Program Change messages. The global “Program
Change” parameter in the CONFIG menu is ignored.
To Next Page
Loading...
