80
> -64 to +63: Modulation amount for the specified destination.
The range is bipolar so that modulation can be inverted, and
amounts are internally doubled so that unipolar destinations
can be modulated over their entire range (i.e. 128 values).
The Amount itself can be controlled by another modulation
source – modulation destination is e.g. “Slot4 Amount2”.
Destination
(VALUE 3 knob)
> Off ... Wavetable 2 Index: Specifies a destination parame-
ter. Use the DESTINATION buttons to move the cursor up
and down.
To Next Page
Loading...
