4. Process
(1) "Please change the cable to Analog"
will be shown on the screen.
(2) Please press "Ok" button.
5. Process
(1) "Please change the cable to Digital" will
be shown on the screen.
(2) Please press "Ok" button.
6. Finish
(1) "OK" will be shown on the screen.
7. Process
(1) Change the VGA cable to "VGA2" and
select "Analog" In "Write Source Select"
item.
(2) Key in the Serial Number into the
Barcode blank space.
(3) Click "Program" button.
4
5
7
6
(3)
(2)
(1)
To Next Page
Loading...
