Acer P7280 Refresh - Disassemble Front Cover Module

P7280/P7270I/P7280 Refresh/P7270I Refresh
Condential 2-13
2-9 Disassemble Front Cover
Module
1. Turn over the Projector and unscrew 4
screws (as red circle)
2. Unscrew 2 screws
(as yellow circle)
3. Cut off Cable Tie
(as red square)
4. Unplug 1 connector
(as yellow square)
5. Disassemble the Front Cover Module
6. Remove the Mylar
(as green square)
7. Release 2 tenons (as blue square) and
disassemble the IR Sensor