Adtech ADTECH4 CNC Series - 2.3 System Operating Condition

ADTECH4 SeriesCNC Maintenance Manual
2.2.6. Program Exchange between CNC System and PC
Perform CAD/CAM/CAPP auxiliary programming with abundant software in PC, and then transmit CNC
program to the system through communication interface (USB disk, RS232 interface), or transmit the
programs from the system to PC.
2.3 System Operating Condition
Operating voltage
24V DC (with filter)
Operating temperature
0℃-45℃
Optimum operating temperature
5℃-40℃
Operating humidity
10%-90% (no condensing)
Optimum operating humidity
20%-85%
Storage temperature
0℃-50℃
Storage humidity
10%-90%
Operating environment
No excessive dust, acid, alkali, corrosive and explosive gases, no strong
electromagnetic interference