Adtech ADTECH4 CNC Series - 3.3.1 Auto-monitor Submenu; 3.3.2 Program Editing Submenu

ADTECH4 SeriesCNC Maintenance Manual
Press a key to show the corresponding content in the bottom of the LCD.
Key in the left: Return to previous menu
Key in the right: Turn pages to show other menus of same level
The main menus of the system include [Monitor], [Edit], [Parameter], [Coordinate] and [Diagnosis]. Each
main menu contains several submenus, which are shown below:
3.3.1. Auto-monitor submenu
3.3.2. Program editing submenu
[Monitor] [Position]
[Absolute]
[Relative]
[Comprehensive]
[Track]
[Preview]
[Plane selection]
[MDI]