Adtech ADTECH4 CNC Series - 9. Main Interfaces of the System; 9.1 Position Interface

ADTECH4 SeriesCNC Maintenance Manual
9. Main Interfaces of the System
9.1 Position Interface
The position interface shows current machine tool coordinates, including absolute position, relative
position and comprehensive position. In the main interface, press [Monitor] to enter the position interface.
To enter position interface:
Absolute position
The position of current machine tool coordinates relative to the origin of workpiece coordinate system
The absolute position interface follows:
[Monitor]
[Position]
[Absolute]
[Relative]
[Comprehensive]