Adtech ADTECH4 CNC Series - 11.3 Axis Parameter Configuration (P2.)

ADTECH4 SeriesCNC Maintenance Manual
Unit
:
Authority
:
Operation admin
Default
:
4000
Effective time
:
Instant
Note
:
Used to set the maximum rate of hand wheel (valid when P1.062 is set to
1).
064
Hand wheel acceleration
Range
:
1 ~ 20
Unit
:
Authority
:
Operation admin
Default
:
10
Effective time
:
Instant
Note
:
Used to set the maximum acceleration of hand wheel (valid when P1.062
is set to 1).
11.3 Axis parameter configuration (P2.)
001
X axis instruction frequency multiplication ratio
X axis instruction frequency division coefficient
Y axis instruction frequency multiplication ratio
Y axis instruction frequency division coefficient
Z axis instruction frequency multiplication ratio
Z axis instruction frequency division coefficient
4 axes instruction frequency multiplication ratio
4 axes instruction frequency division coefficient
B axis instruction frequency multiplication ratio
B axis instruction frequency division coefficient
C axis instruction frequency multiplication ratio
C axis instruction frequency division coefficient
Range
:
1~65535
Unit
:
None
Authority
:
Operation admin