Adtech ADTECH4 CNC Series - 2. System Technical Features; 2.1 Technical Parameters

ADTECH4 SeriesCNC Maintenance Manual
2. System Technical Features
2.1 Technical Parameters
Function
Name
Specification
Control axis
Control axes
4 axes (CNC4640 series)
4 axes (CNC4940 series)
6 axes (CNC4960 series)
2 axes (CNC4620 series)
Simultaneous control axes
4 axes linear interpolation (CNC4640
series)
2 axes linear interpolation (CNC4620
series)
2 axes arc interpolation
Input instructions
Minimum setting unit
0.001mm
Minimum moving unit
0.001mm
Maximum instruction value
±9999.999mm
Feeding
Fast feeding speed
X axis, Y axis, Z axis, A axis: 9999mm/min
(maximum)
Feeding speed range
Feeding per minute
1~9999mm/min
Feeding per
revolution
1~500 rpm
Automatic acceleration/deceleration
Yes
Feeding speed rate
10~150%
Manual
Continuously manual feeding,
Yes
Returning to reference point manually
All control axes return to reference point
simultaneously
(allow setting order of priority)
Single step/hand wheel function
Yes
Interpolation
Positioning, linear interpolation, arc
G00, G01, G02/G03