Adtech ADTECH4 CNC Series - 4.7.2 System Parameter Setting

ADTECH4 SeriesCNC Maintenance Manual
assignment; to change to incremental assignment, press the "UP/DOWN arrow"
key
4.7.2. System parameter setting
The system parameters can be modified as follow:
 Select the edit mode;
 In the main menu, press [Parameter] to enter parameter setting interface;
 Then, press the submenu key to select the parameter type (comprehensive,
management …);
 Move cursor to select the parameter, enter the value and then press [EOB] to modify the
parameter where the cursor locates.