Adtech ADTECH4 CNC Series - Page 140

ADTECH4 SeriesCNC Maintenance Manual
again;
The super user can modify all passwords, while the operation user only
can modify the own password.
Password 0 indicates that the password isn’t checked in this mode; it isn’t
required to enter the admin mode to modify the parameters.
004
Initialize comprehensive parameters to default <●>
005
Initialize IO configuration to default <●>
006
Reset all parameters <●>
Range
:
None
Unit
:
None
Authority
:
Super user
Default
:
None
Effective time
:
Instant
Note
:
Initial parameter table only in super user mode.
007
Back up parameters
008
Restore parameters
Range
:
None
Unit
:
None
Authority
:
Super user
Default
:
None
Effective time
:
Instant
Note
:
The parameters are backed up and restored only in super user mode.
The parameters are backed up to the sysconf.bak file in the root directory
of the controller. If this folder already has a file with same name, the latest
backup will overwrite this file.
The sysconf.bak file in the root directory is also used for restoring. During
restoring, it will check whether the parameter versions are same according
to the backed up parameter version; if not, the system won’t restore the
parameter table.
After restoring, the system will restart automatically.
009
Generate password file