Adtech ADTECH4 CNC Series User Manual

ADTECH4 SeriesCNC Maintenance Manual
After executing the block with M30, the automatic operating stops, changes into reset state, and returns to
program start.
Feeding pause
During automatic operation, press the [Pause] key on the operation panel, the automatic operation pauses
and the indicator is on; press [Start] again to continue operating the machine tool and the pause indicator is on.
Reset
During automatic operation, press the [Reset] key on the operation panel and the system stops
immediately. Here, [Reset] has the same function as emergency stop button.

Adtech ADTECH4 CNC Series Specifications

General

Brand	Adtech
Model	ADTECH4 CNC Series
Category	Control Systems
Language	English