Model A
2
O
®
Advanced Automated Osmometer User’s Guide
Figure 20
: The Control Solutions Screen
• Limits (+/-): Allowable deviation from the expected value. This
value is used to take any action on out-of-limit measurements as
described below.
Edit Control
When a control is selected and the Edit Control button is pushed, a
screen as shown in Figure 21 appears. The three fields described above,
Barcode, Expected Value and Limits (+/-) may be changed by pushing
the Modify button next to the current value. A text input screen is used
to enter the new value.
Add Control
When the Add Control button is pushed, a text input screen is used to
enter the name of the control. Then, the Edit Control screen (Figure 21)
is shown to enter the other fields as described above.
To Next Page
Loading...
Need help?
General
