ADAM-6200 User Manual 4
Group Configuration
In certain application scenarios, it’s necessary to set multiple modules with the same
settings because these modules are doing the same tasks on different sites. Users
have to set configurations of module one after another before on-site deployment.
After the modules are installed and the system is running, it will still require repetitive
effort to carry out firmware updates.
The ADAM-6200 series modules are equipped with group configuration capability to
reduce the repetitive effort and quickly finish the multiple module setups, including
firmware upgrades, configuration and HTML 5 files, at one time. Users can start the
implementation of modules faster as the time for configuration is tremendously
reduced.
To Next Page
Loading...
